IP LDK-20 Programming Manual Quick
ADMIN Programming table
517
5.3.11 ISDN STATION ATTRIBUTE
PGM FLEX
ITEM
RANGE
DEFAULT
REMARK
1
CLIP LCD
Display
ON / OFF
ON
If this value is set to ON, the CLI is displayed on the
station’s LCD.
2
COLP LCD
Display
ON / OFF
OFF
If this value is set to ON, the connected party’s CLI is
displayed on station’s LCD.
3
CLI / REDIRECT
Display
CLI /
REDIRECT
CLI
When using networking, If this value is set to RED, the
redirected CLI is displayed. Otherwise, the original CLI is
displayed
4
CLI MSG Wait
ON / OFF
OFF
If this value is set to ON, the station can receive CLI
message from CO Incoming call, when the station doesn’t
answer.
5
EXT or CO ATD
ATD/EXT
EXT
If this value is set to ATD, CO ATD code(ADMIN 200) is
used to outgoing CLI information. Otherwise, station number
is used as CLI information
6
Keypad Facility
KEYPAG /
DTMF
DTMF
If this value is set to KEYPAD, ISDN station sends digit in
keypad facility after connected. Otherwise DTMF is used.
7
Long / Short
LONG /
SHORT
SHORT
If this value is set to LONG, ISDN station acts in LONG
passive mode.
8
CPN Type
0-2
0(Not used)
This value set CPN IE type of SETUP message.
(If this value is set to 0, all S0 stations of the S port get the
incoming call. in case of 1 & 2, only one specific station gets
the call.)
9
S0 Sub-address
0-2
0(Not used)
This value indicates how the sub-address is used in SETUP
message.
If this value is set to 0, station sub-address not used. Else if
set to 1, sub-address is filled in the CPN field of SETUP
message. Otherwise, sub-address is filled in the CPSN
(Called Party Sub-address Number) field of SETUP
message.
10
Reserved
-
-
-
11
CLI Name
Display
ON / OFF
OFF
If this field is ON, the system checks whether the received
CLI is matched with the speed dial data or not. If it is
matched, the speed dial name is displayed.
12
ISDN CLI Station
Number
Max 4 digits
This value is used as outgoing CLI When outgoing CLI is
active and CLI type is EXT(Station)
13
Progress
Indication
ON / OFF
OFF
If this value is set to ON, the Progress Indicator can notice
non-ISDN device.
14
ISDN CLIR
ON / OFF
OFF
If this value is set to ON, the CLI information is restricted by
PX .
15
ISDN COLR
ON / OFF
OFF
If this value is set to ON, the connect party’s CLI information
16
DID Restriction
ON / OFF
OFF
If this value is set to ON, the station is restricted to receive
the DID incoming call.
17
DID Call Wait
ON/OFF
OFF
If this value is set to ON, when the station is busy, another
DID call could be waiting.
18
CLI Type
LONG/SRT
SHORT
This value selects CLI type.
114
19
Long Station CLI
Max 12
digits
Logical STA
Number
If outgoing CLI is activated and CLI type is EXT(Station), this
value is used as outgoing CLI.
Содержание IP LDK-20
