LG-Nortel IP LDK-20, Руководство по программированию

Страница: 101 / 581

IP LDK-20 Programming Manual System Feature
85
3. Entering another alpha-numeric data, then LCD will display names started with the updated input.
It will be continued until you stops entering the character.
4. When the matched name is displayed, move the cursor to the name (The cursor points to the
first name in the LCD) and press [HOLD/SAVE] button to make a call.
To search a name by scrolling,
1. While two names are displayed on the LCD,
2. Press the
[
▼
] key with the cursor on the first line and the cursor points to the second line on the
LCD.
3. Press the [
▲
] key with the cursor on the second line, then the cursor points to the first line on the
LCD.
4. Press the [
▼
] key with the cursor on the second line, the next two lists are displayed on the LCD.
5. When the matched name is displayed, move the cursor and press the [HOLD/SAVE] button to
make a call.
To register the name in SLT,
1. Lift the handset.
2. Dial
5 6 3( Programming Mode Enter Code : see Ref.1) . And confirmation tone will be heard.
3. Dial 7 4 (Name Register code)
4. Enter the name. (Up to 7 letters; Refer to the below English Character Set)
5. Make hook-flash to save.
Condition
1. Dial by name is only available to a DKTU with LCD for programmed names.
2. The name should be registered to use 'Dial By Name'.
3. If you dial a group (I/S/U) which has no entry, error tone will be heard.
4. In SLT and DKTU with no LCD, only the station name can be entered.
5. The speed dial which has only phone number without name will not be listed by Dial By Name.
6. Pressing the
[CALLBK] button, the last letter of user input is deleted and the previous matched
name is displayed. Pressing the [CALLBK] button without entering any letter, there is no action in
the system.
7. For entering alpha-numeric data, see the English Character Set.
Reference
1. Programming Mode Enter Code : 3.6.7(ADMIN 106 – FLEX 20)