IP LDK-20 Programming Manual System Feature
92
Admin Programming
n
Wake-up Fail Ring Timer
4.5.3.7 (PGM 182 - FLEX 7)
2.4.28
Automatic Fax Transfer
Description
The system can determine if an incoming call from the preprogrammed CO line is for FAX (facsimile)
or for speech terminal by detecting the tone of the call (1100Hz, 0.5s ON/3s OFF repeated). When the
system detects a FAX tone from the incoming line within predetermined time, the system transfers the
call to the station that is a Fax machine. If the FAX tone is not detected within predetermined time,
system gives rings to stations that are programmed to ring.
Condition
1. Only one CO line can be programmed as a FAX CO line. If the FAX CO line is not programmed,
Automatic Fax Transfer will not be activated.
2. Station 17 is used as the FAX Station So, FAX machine should be connected to the port for
station 17 to use this feature. In compact type KSU, station 15 is used for FAX station.
3. If the FAX tone is not detected within the FAX tone detection time, the system will give rings to the
stations that are programmed to ring.
4. If the FAX CO line is not answered within the FAX CO call time, the line will be released.
5. Outside caller connected to the FAX CO line can hear the ring back tone while system is
detecting a FAX tone.
6. In order to transfer calls only from FAX to the FAX station, do not assign CO ring to the FAX
station 17.
7. If a CO line is programmed for DISA and for Automatic FAX Transfer as well, incoming calls from
that CO line are served as DISA calls. So, if a user wants to call the FAX station, just call station
17 by exploiting DISA call.
8. When the FAX machine goes to idle after a FAX call, the associated CO line is released
9. If the FAX CO line is disconnected (“disconnect clear”) during a FAX call, CO line is released and
FAX machine becomes idle.
10. Only Analog lines are possible to use this feature.
Admin Programming
n
Auto FAX Transfer CO
4.4.2.17(PGM161, FLEX17 )
n
FAX tone Detect Timer
4.5.3.13(PGM182, FLEX13)
n
FAX CO Call Timer
4.5.3.14(PGM182,FLEX14)
Содержание IP LDK-20
