Issue 2.2
Feature Description and Operation Manual
92
5.4
Headset
Description
An industry standard headset can be connected to a DKT instead of the handset. The station
is programmed for headset operation in place of speakerphone operation, which allows the
On/Off button to control the headset state, On or Off-hook. Headset operation and the device
to receive ring (headset or speaker) can be assigned through System Admin or through Station
User Programming.
Operation
To set Speakerphone or Headset operation,
1. Press the [TRANS/PGM] button.
2. Dial code ‘7 5’.
3. The Station Answer mode should be displayed on the LCD.
4. Dial ‘1’ (Speaker mode) or ‘0’ (Headset mode).
To assign device to ring,
1. Press the [TRANS/PGM] button.
2. Dial code ‘7 6’.
3. The Station Answer mode should be displayed on the LCD.
4. Dial
‘1’ for Speaker ring only
‘2’ for Headset only
‘3’ for Both
Consideration
Page announcements are always received over the DKT speaker and not the Headset.
Reference
A. Station User Programming
B. Intercom Signal Mode
C. Paging
Admin Programming
Headset Ring Mode (PGM 111, Flexible button 10)
Defines the device (headset or speaker) to receive ring at the station
Speakerphone/Headset (PGM 111, Flexible button 11)
Assigns Speakerphone or Headset operation
Содержание ipldk-60
