Lexmark Z11 Color Jetprinter, Руководство пользователя

Страница: 42 / 49

Appendix
38
Notices
Federal
Communications
Commission (FCC)
Compliance Information
Statement
The Lexmark Z11 Series Color
Jetprinter has been tested and
found to comply with the limits
for a Class B digital device,
pursuant to Part 15 of the FCC
Rules. Operation is subject to the
following two conditions: (1) this
device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference
that may cause undesired
operation.
The FCC Class B limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there
is no guarantee that interference
will not occur in a particular
installation. If this equipment does
cause harmful interference to
radio or television reception,
which can be determined by
turning the equipment off and on,
the user is encouraged to try to
correct the interference by one or
more of the following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult your point of purchase
or service representative for
additional suggestions.
The manufacturer is not
responsible for any radio or
television interference caused by
using other than recommended
cables or by unauthorized changes
or modifications to this
equipment. Unauthorized changes
or modifications could void the
user's authority to operate this
equipment.
To assure compliance with FCC
regulations on electromagnetic
interference for a Class B
computing device, use a properly
shielded and grounded cable such
as Lexmark part number 1329605.
Use of a substitute cable not
properly shielded and grounded
may result in a violation of FCC
regulations.
Any questions regarding this
compliance information statement
should be directed to:
Director of Lab Operations
Lexmark International, Inc.
740 New Circle Road NW
Lexington, KY 40550
(606) 232-3000
Industry Canada
Compliance Statement
This Class B digital apparatus
meets all requirements of the
Canadian Interference-Causing
Equipment Regulations.
Avis de conformité aux
normes d’Industrie
Canada
Cet appareil numérique de la
classe B respecte toutes les
exigences du Règlement sur le
matériel brouilleur du Canada.
European Community
(EC) directives
conformity
This product is in conformity with
the protection requirements of EC
Council directives 89/336/EEC
and 73/23/EEC on the
approximation and harmonization
of the laws of the Member States
relating to electromagnetic
compatibility and safety of
electrical equipment designed for
use within certain voltage limits.
A declaration of conformity with
the requirements of the Directive
has been signed by the Director of
Manufacturing and Technical
Support, Lexmark International,
S.A., Boigny, France.
This product satisfies the Class B
limits of EN 55022 and safety
requirements of EN 60950.
Japanese VCCI notice
The United Kingdom
Telecommunications
Act 1984
This apparatus is approved under
the approval number NS/G/1234/
J/100003 for the indirect
connections to the public
telecommunications systems in
the United Kingdom.
Power supply
replacement
If your power supply fails, replace
it with the Lexmark replacement
part or other UL LISTED Direct
Plug-In Power Unit marked
“Class 2" and rated 30 Vdc at 500
mA to 830mA.