Appendix
34
best printing results. You can also
use the printer software to care for
your printer.
Using the Control
Program
Use the Control Program when
you want to:
• Align print cartridges for best
print quality
• Clean print nozzles
• Change settings for DOS
printing
• Control when and how the
Control Program appears
• Install or replace print
cartridges
• Monitor print jobs and print
cartridge ink level
• Print a test page
• Cancel a print job
Opening the Control
Program
From the Lexmark Z11 Series
program group, double-click the
Control Program icon.
Using the Printer
Properties
Use the Printer Properties when
you want to:
• Adjust print quality/print speed
• Choose different sizes and types
of media
• Choose page orientation
• Reset document defaults
Opening the Printer
Properties from your
application
You can open the Printer
Properties from almost any
application. This allows you to
change printer settings for each
document you print. To open the
Printer Properties from your
application:
1
Open the application’s File
menu.
2
Choose Print, Print Setup,
or Printer Setup.
3
In the Printer Setup dialog
box, click the Properties,
Options or Setup button
(depending on the
application).
4
Change settings as needed.
Opening Printer Properties
from Windows
Change the Printer Properties
from Windows to use same printer
settings each time you print. This
way, you never need to change
them from your application.
1
Open the Lexmark Z11
Series Control Program.
2
Click the Windows Printing
tab.
3
Click the Windows Driver
Setup button.
Using the Spool
Manager in Windows 3.1
or 3.11
The Spool Manager automatically
runs each time you send a
document to print through
Windows. To open the Spool
Manager from the Control
Program:
1
From the Lexmark Z11
Series program group,
double-click the Control
Program icon.
2
Click the Windows Printing
tab.
3
Click the Spool Manager
button.
Printing from DOS
You must install the following
before you can print from DOS
applications:
• Lexmark Z11 Series Color
Jetprinter software
• PCL 3 printer driver for each
DOS application
Appropriate drivers in order of
preference are:
• HP DeskJet 500C
• HP DeskJet 500
You must use the HP DeskJet
500C for color output. If your
application does not include
drivers for the HP DeskJet 500C
or the HP DeskJet 500, contact the
software manufacturer for a
compatible driver replacement.
After completing the
installation, you must restart
Windows to print from DOS.
Printing from a DOS
application in Windows
Use these instructions only if your
application runs from the DOS
prompt in Windows.
When you print from a DOS
application, your printer uses PCL
3 emulation. You must install a
printer driver for PCL 3 emulation
in each DOS application.
In Windows 3.1or 3.11, avoid
switching from your DOS
application to another application
while your job is printing. See the
Readme file for your printer for
more information.
Follow the steps to enable DOS
printing to your Lexmark printer:
Содержание Z11 Color Jetprinter
Страница 1: ...User s Guide ...
Страница 24: ...Chapter 3 20 ...
