Action
Yes
No
Step 2
a
Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.
Notes:
•
Make sure that the settings match the paper loaded in
the tray.
•
You can also change the settings on the printer control
panel. From the home screen, touch
Settings
>
Paper
>
Tray Configuration
>
Paper Size/Type
.
b
Print the document.
Is the print too dark?
Go to step 3.
Go to step 6.
Step 3
Make sure that the paper has no texture or rough finishes.
Are you printing on textured or rough paper?
Go to step 4.
Go to step 6.
Step 4
a
Replace textured or rough paper with plain paper.
b
Print the document.
Is the print too dark?
Go to step 5.
The problem is
solved.
Step 5
a
Load paper from a fresh package.
Note:
Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you are ready to use it.
b
Print the document.
Is the print too dark?
Contact
The problem is
solved.
Fine lines are not printed correctly
Note:
Before solving the problem, print the Print Quality Test Pages. From the home screen, touch
Settings
>
Troubleshooting
>
Print Quality Test Pages
.
Troubleshoot a problem
186
Содержание XM3142
