Lexmark X925 7541-03 series, Руководство по обслуживанию

Страница: 112 / 500

2-74
Service Manual
7541-03x
Go Back
Previous
Next
35 Insufficient memory
to support Resource
Save feature • Select Continue to disable Resource Save and continue printing.
• To enable Resource Save after receiving this message:
- Make sure the link buffers are set to Auto, then exit the menus to activate the link
buffer changes.
- When
Ready
is displayed, enable Resource Save.
• Install additional memory.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
37 Insufficient memory
to collate job • Select Continue to print the portion of the job already stored and begin collating the rest
of the job.
• Cancel the current job.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
37 Insufficient memory
for Flash Memory
Defragment operation • Select Continue to stop the defragment operation and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
37 Insufficient memory,
Some Held Jobs Were
Not Restored • The printer deleted some held jobs in order to process current jobs.
• Select
Continue to clear the message.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
37 Insufficient memory,
Some Held Jobs Will
Not Be Restored • The printer was unable to restore some or all of the confidential or held jobs on the hard
disk.
• Select Continue to clear the message.
• If this message occurs again, replace the hard drive.
• If this does not fix the problem, replace the RIP board. See
“RIP board removal” on
page 4-73 .
37 Insufficient Defrag
Memory There is insufficient memory to perform the Flash Memory Defragment operation. The user
can:
• Delete font, macros, and other data in memory.
• Install additional printer memory.
38 Memory Full The following options are available:
• Select Continue to clear the message and continue printing. The job may not print
correctly.
• Cancel the current job.
• Install additional printer memory.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
39 Complex Page The page is too complex to print. Options are:
• Select Continue to continue. The job may not print correctly.
• Cancel the job.
50 PPDS Font Error • Select Continue to clear the message and continue printing. The job may not print
correctly.
• Cancel the current job.
• If this does not fix the problem, replace the RIP board. See “RIP board removal” on
page 4-73 .
Error code Action