Safety
Leuze electronic
LES 36
11
TNT
35/7-2
4
V
2
Safety
This sensor was developed, manufactured and tested in line with the applicable safety stan-
dards. It corresponds to the state of the art.
2.1
Intended use
The Light section sensors of the LES series are laser distance sensors for presence detec-
tion of dimensions of objects using their edges.
Areas of application
The LES series Light section sensors are especially designed for the following areas of
application:
• Edge and height measurement of web material products and paper rolls
• Width and height measurement of cartons
• Edge and height measurement of stackable materials (e.g. chipboards)
• Complex object detection with window tracking
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the device is operated
in a manner not complying with its intended use.
Only operate the device in accordance with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by improper use.
Read these operating instructions before commissioning the device. Knowledge of
this document is required in order to use the equipment for its intended purpose.
NOTE
Comply with conditions and regulations!
Observe the locally applicable legal regulations and the rules of the employer's liability
insurance association.
OPERATION NOTICE IN ACCORDANCE WITH UL CERTIFICATION:
CAUTION – Use of controls or adjustments or performance of procedures other than
specified herein may result in hazardous light exposure.
