LESsoft configuration software
Leuze electronic
LES 36
82
TNT
35/7-2
4
V
X, Width (X), Z, Height (Z)
In the fields of these lines, the current measurement values
LX
,
RX
,
LZ
,
RZ
,
W
and
H
are
displayed for each EAW in mm (see Chapter 4.3.3), provided the EAW was defined.
Measurement values and their meaning:
• Edge positions: LX, LZ, RX, RZ
- LX = Left edge X-coordinate
- LZ = Left edge Z-coordinate
- RX = Right edge X-coordinate
- RZ = Right edge Z-coordinate.
• Width of objects: W (calculated from the distance of RX and LX in the X direction).
• Height difference of left and right edge: H (calculated from the distance of RZ and LZ
in the Z-direction).
Profibus Inputs 1 , Profibus Inputs 2
The selection of which process values are transmitted via PROFIBUS is made here. With
PROFIBUS devices, two measurement values (LX, RX, LZ, RZ, W or H; see Chapter 4.3.3)
can be output per EAW via the PROFIBUS. In the
Profibus Inputs 1
and
Profibus Inputs 2
fields, you can configure which measurement values these are for
up to four edge analyses.
Note!
The changed settings must be transferred to the sensor with
Apply Settings
.
