LESsoft configuration software
Leuze electronic
LES 36
92
TNT
35/7-2
4
V
9.5
Menu commands
9.5.1
Saving parameter settings/File menu
The
File
menu is used to save parameter data to
the PC. In this way, settings for various detection
tasks can be defined within the scope of commis-
sioning and stored on data carriers and parameter
files. During operation, the LES is reconfigured via
Inspection Tasks
. A parameter file stored on a
data carrier can only be used with LESsoft config-
uration software!
•
New
creates a new configuration file.
•
Open
opens a configuration file from the data
carrier.
•
Save
saves the open configuration file with the same name.
•
Save as
saves the open configuration file under a different name.
•
Save as default
saves the open configuration as the default setting which is always
loaded when LESsoft is opened.
In addition, the
File
menu offers the possibility to export the following views format to data
carriers (available formats:
*.png, *.jpg, *.bmp, *.tif)
:
•
Profile View:
the current view as 2D view
9.5.2
Transmitting parameter settings/Configuration menu
The
Configuration
menu is used to exchange parameter
data with the connected LES.
•
Load from Sensor
loads all parameter settings for all
defined inspection tasks from the LES and displays them
in the software.
•
Transmit to Sensor
permanently stores all parameter settings of all defined
inspection tasks from the configuration software in the LES.
•
Reset to factory settings
resets the LES to factory settings.
