Leuze 50127219, Оригинальная инструкция по эксплуатации

Страница: 99 / 130

PROFINET interface
96 AMS 348
i
SSI Leuze electronic GmbH + Co. KG
9.9.3.16 Module 16: Velocity status
PROFINET module identifier
Module ID 1016
Submodule ID 1
Description
This module supplies various velocity measurement status information to the PROFINET
master.
Parameter
None
Input data
Limit value
range start
The velocity limit value is moni
-
tored beginning at this position. 5…8
sign
32 bit
-999999 … +999999 0 mm
in/
100
–
Limit value
range end
The velocity limit value is moni
-
tored up to this position.
9
…
12
sign
32 bit
-999999 … +999999 0 mm
in/
100
–
Output data length: 13 bytes consistently
Ñ
Ö
Input data Description Rel.
addr
.
Data
type
Value Default Unit CR to
module
Metr. Inch
Velocity
measure
-
ment error
Signals that no valid velocity could
be ascertained.
1.0 Bit
0: OK
1: Error
– – –
Movement
status
Signals whether a movement
> 0.1 m/s is currently being
detected.
1.1 Bit
0: No movement
1: Movement
– – –
Direction of
movement
When the movement status is
activated, this bit indicates the
direction.
1.2 Bit
0: Positive direction
1: Negative direction
– – –
Velocity limit
value status
1
Signals that limit value 1 has been
exceeded.
1.3 Bit
0: Limit value
maintained
1: Limit value violated
– – 11c
Velocity limit
value status
2
Signals that limit value 2 has been
exceeded.
1.4 Bit
0: Limit value
maintained
1: Limit value violated
– – 12c
Velocity limit
value status
3
Signals that limit value 3 has been
exceeded.
1.5 Bit
0: Limit value
maintained
1: Limit value violated
– – 13c
~
Ä
Å
Ç
É
Ñ