Leuze 50127219 Скачать руководство пользователя страница 67

Страница: 67 / 130

PROFINET interface

AMS 348

SSI

Leuze electronic GmbH + Co. KG

File name structure

The file name of the GSD file is constructed according to the following rule:

GSDML-[GSDML schema version]-Leuze-AMS348i-[date].xml

Explanation:

• GSDML schema version:

Version identifier of the GSDML schema version used, e.g., V2.3

• Date:

Release date of the GSD file in the format yyyymmdd.

This date also stands for the version identifier of the file.

Example:

GSDML-V2.3x-Leuze-AMS348i-20090503.xml

The GSD file can be found at www.leuze.com.
All data in modules required for operating the AMS 348

is described in this file. These are

input and output data and device parameters for the functioning of the AMS 348

and the defi

nition of the control and status bits.
If parameters are changed, e.g., in the project tool, these changes are stored on the PLC

side in the project, not in the GSD file. The GSD file is a certified and integral part of the device

and must not be changed manually. The file is not changed by the system either.
The functionality of the AMS 348

is defined via GSD parameter sets. The parameters and

their functions are structured in the GSD file using modules. A user-specific configuration

tool is used during PLC program creation to integrate the required modules and configure

them appropriately for their respective use. During operation of the AMS 348

on the

PROFINET, all parameters are set to default values. If these parameters are not changed

by the user, the device functions with the default settings delivered by Leuze.
For the default settings of the AMS 348

, please refer to the following module descriptions.

Содержание 50127219



































































































































Результаты поиска

Содержание 50127219

Отзывы:

Похожие инструкции для 50127219

Бренды по названию

Популярные бренды

Leuze 50127219, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание 50127219

Отзывы:

Похожие инструкции для 50127219

Бренды по названию

Популярные бренды