Leuze electronic ODS 9 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 72

background image

Connecting to a PC – Sensor Studio

Leuze electronic

ODS 9

47

8

Connecting to a PC – Sensor Studio

The

Sensor Studio

configuration software – in combination with an IO-Link USB master – provides a graph-

ical user interface for the operation, configuration and diagnosis of sensors with IO-Link configuration inter-
face (IO-Link devices), independent of the selected process interface.

Each IO-Link device is described by a corresponding IO Device Description (IODD file). After importing the
IODD file into the configuration software, the IO-Link device connected to the IO-Link USB master can be
operated, configured and checked – conveniently and in multiple languages. An IO-Link device that is not
connected to the PC can be configured offline.

Configurations can be saved and reopened as projects for transferring back to the IO-Link device at a later
time.

NOTICE

Only use the

Sensor Studio

configuration software for products manufactured by

Leuze elec-

tronic

.

The

Sensor Studio

configuration software is offered in the following languages: German, Eng-

lish, French, Italian and Spanish.

The FDT frame application of the

Sensor Studio

supports all languages; all languages may not

be supported in the IO-Link device DTM (Device Type Manager).

The

Sensor Studio

configuration software is designed according to the FDT/DTM concept:

• You make the individual configuration settings for the sensor in the Device Type Manager (DTM).

• The individual DTM configurations of a project can be called up via the frame application of the Field

Device Tool (FDT).

• Communication DTM: IO-Link USB master

• Device DTM: I/O-Link Device/IODD for ODS 9

NOTICE

Configuration changes only via the control!

Ä

Always

perform the configuration for process mode via the control and, if applicable, the in-

terface.
In process mode, only the configuration conveyed via the control is active. The configuration
changes made via Sensor Studio are only active in process mode if they were previously
transmitted 1:1 to the control.

Procedure for the installation of the software and hardware:

Ä

Install the

Sensor Studio

configuration software on the PC.

Ä

Install the driver for the IO-Link USB master on the PC.

Ä

Connect the IO-Link USB master to the PC.

Ä

Connect the OSD 9 (IO-Link device) to the IO-Link USB master.

Ä

Install IO-Link device DTM with IODD file for ODS 9 in the

Sensor Studio

FDT frame.

«
...
45
46
47
48
49
...
»

Содержание ODS 9









































































Отзывы:

Нет отзывов

Похожие инструкции для ODS 9

mydlink DSP-W110

Бренд: D-Link Страницы: 13

Бренд: D-Link Страницы: 44

Бренд: Panasonic Страницы: 2

ThermoSensor Clamp

Бренд: LaserLiner Страницы: 44

Бренд: Yealink Страницы: 6

Бренд: Aroflora Страницы: 36

Sprinter Bed System Adventure Wagon Kit

Бренд: FVC Страницы: 8

Бренд: MELINERA Страницы: 44

Бренд: Badabulle Страницы: 21

Walimex Pro Operator

Бренд: walser Страницы: 24

PowerStation Plus

Бренд: Mophie Страницы: 19

Бренд: Waeco Страницы: 168

Бренд: Nauticam Страницы: 30

Бренд: Rago FABRICATION Страницы: 10

Бренд: Ohmeda Страницы: 84

Бренд: 7 A.M. Enfant Страницы: 2

Бренд: Nauticam Страницы: 33

Бренд: Oki Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды