Leuze electronic ODS 9 Скачать руководство пользователя страница 15

Страница: 15 / 72

Device description

Leuze electronic

ODS 9

3.3.4

Meaning of the display icons

The

and

buttons have different functions depending on the operating situation. These functions are

displayed via icons at the right edge of the display.

Icon

Position

Function

First line

By pressing the navigation button

you select the next parameter within a

menu level.

Second line

Symbolizes the respective, next menu level that you have not yet selected.

Second line

Press the enter button

to exit the menu level or the menu.

Second line

Symbolizes the input mode.

The selected (highlighted) option field can be a fixed selection parameter or a
multi-digit input field.

With a multi-digit input field, you can change the active digit cyclically using the
navigation button

and switch from one digit to the next using the enter but-

ton .

Note:

If this icon does not appear, the local configuration lock is set via IO-Link

(index: 12, bit 2).

Second line

Confirmation of the selection.

This icon appears when you complete an option field with the enter button
and the previously entered value is valid.

Pressing the enter button

again saves and displays the change locally.

Second line

Reject the selection.

This icon is accessed from the previous icon (check mark) by pressing the nav-
igation button .

Press the enter button

to reject the current value or option parameter.

Second line

Return to selection.

This icon is accessed from the previous icon (cross) by pressing the naviga-
tion button .

This icon is also accessed if the value newly entered previously is outside the
permissible value range, making correction of the entry necessary.

Press the enter button

to reset the current value or option parameter and

enter a new value or select a new option parameter.

3.4

Configuration / menu structure

The following chapters show the structure of all menu items. For each sensor model, only the actually avail-
able menu items are present for entering values or for selecting settings.

NOTICE

Use the navigation button

to move through the menu.

Activate the desired selection with the enter button

NOTICE

The number of bars at the left edge of the display indicates the current menu level.

For information on the meaning of the display icons, see chapter 3.3.4 "Meaning of the display
icons".

Содержание ODS 9









































































Результаты поиска

Содержание ODS 9

Отзывы:

Похожие инструкции для ODS 9

Бренды по названию

Популярные бренды

Leuze electronic ODS 9, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание ODS 9

Отзывы:

Похожие инструкции для ODS 9

Бренды по названию

Популярные бренды