Lenovo ThinkServer RD350G Скачать руководство пользователя страница 88

Страница: 88 / 186

Installing the RAID 110i key

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Note:

Use any documentation that comes with the RAID 110i key and follow those instructions in addition to

the instructions in this topic.

To install the RAID 110i key, do the following:

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. Prepare your server. See

“Removing or extending the server from the rack cabinet” on page 57.

3. Remove the server cover. See

“Removing the server cover” on page 57.

4. Touch the static-protective package that contains the RAID 110i key to any unpainted surface on the

outside of the server. Then, take the RAID 110i key out of the package.

Note:

Carefully handle the RAID 110i key by its edges.

5. Locate the RAID upgrade key connector on the system board and then insert the RAID 110i key into the

RAID upgrade key connector on the system board.

Figure 34. Installing the RAID 110i key

What to do next:

• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 142.

Removing the RAID 110i key

ThinkServer RD350G User Guide and Hardware Maintenance Manual

your

eading and

page and

page

your

eading and

page and

page

Содержание ThinkServer RD350G



























































































































































































Результаты поиска

Содержание ThinkServer RD350G

Отзывы:

Похожие инструкции для ThinkServer RD350G

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD350G, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkServer RD350G

Отзывы:

Похожие инструкции для ThinkServer RD350G

Бренды по названию

Популярные бренды