Lenovo ThinkServer RD350G, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 138 / 186

Connecting an external tape drive
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Depending on the model, your tape drive might look slightly different from the illustrations in this topic.
• Use any documentation that comes with the tape drive and follow those instructions in addition to
the instructions in this topic.
To connect an external tape drive, do the following:
1. Connect one end of the Y cable to the USB 3.0 connector on the rear of the external tape drive. Then,
connect the other end of the Y cable to two available USB connectors on the server.
Figure 99. Connecting the external tape drive
2. Verify if the tape drive works correctly.
Replacing the hot-swap hard-disk-drive backplane
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• The hot-swap hard-disk-drive backplane is sensitive to ESD. Ensure that you read and understand
“Handling static-sensitive devices” on page 56 first and carefully perform the operation.
• Depending on the model, your server might look slightly different from the illustrations in this topic.
• The illustrations in the following procedure show the backplane for 3.5-inch hard disk drives. For the
backplane for 2.5-inch hard disk drives, the replacement procedure is similar.
To replace the hot-swap hard-disk-drive backplane, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
124
ThinkServer RD350G User Guide and Hardware Maintenance Manual
your eading and
page and page
your eading and
page and page