Lenovo ThinkServer RD340 Скачать руководство пользователя страница 119

Страница: 119 / 216

Notes:

• Use any documentation that comes with the TMM Premium and follow those instructions in addition to

the instructions in this topic.

• If you remove the TMM Premium, the iKVM function for server remote management will be unavailable.

• Depending on the model, your server might look slightly different from the illustration in this topic.

To remove the TMM Premium, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 75.

4. Locate the TMM Premium on the system board and then lift the TMM Premium straight up to remove

it from the connector.

Figure 61. Removing the TMM Premium

5. If you are instructed to return the old TMM Premium, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

Chapter 6

Installing, removing, or replacing hardware

107

Содержание ThinkServer RD340

























































































































































































































Результаты поиска

Содержание ThinkServer RD340

Отзывы:

Похожие инструкции для ThinkServer RD340

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD340, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание ThinkServer RD340

Отзывы:

Похожие инструкции для ThinkServer RD340

Бренды по названию

Популярные бренды