Lenovo ThinkServer RD340 Скачать руководство пользователя страница 106

Страница: 106 / 216

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Use any documentation that comes with the RAID card and follow those instructions in addition to

the instructions in this topic.

• Depending on the specific type, the RAID card might look different from the illustration in this topic.

• If you remove the RAID card, you will lose the advanced SATA/SAS hardware RAID functions.

• Ensure that you back up your data before removing the RAID card because you might need to reconfigure

RAID and reinstall the operating system after removing the RAID card.

To remove the RAID card, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,

clean, and static-protective surface. See the

Rack Installation Instructions

that comes with the server.

3. Remove the server cover. See “Removing the server cover” on page 75.

4. Remove the cooling shroud. See “Removing and reinstalling the cooling shroud” on page 79.

5. Remove the riser card assembly 2 and lay it upside down on a flat, clean, and static-protective surface.

The procedure is similar to that of the riser card assembly 1. See “Replacing the riser card assembly
1” on page 160.

6. Locate the RAID card, which is installed in the PCI Express card slot on the riser card assembly 2.

7. Disconnect all cables from the RAID card and any other related parts.

8. Grasp the RAID card by its edges and gently slide the RAID card out of the RAID card retention bracket

and the riser card assembly 2.

Note:

The RAID card might fit tightly into the PCI Express card slot. If necessary, alternate moving each

side of the RAID card a small and equal amount until it is removed from the slot.

Figure 53. Removing the RAID card

9. Depending on your needs, do one of the following:

• Install a new RAID card to replace the old one and reconnect cables. See “Installing the RAID card”

on page 90.

ThinkServer RD340 User Guide and Hardware Maintenance Manual

Содержание ThinkServer RD340

























































































































































































































Результаты поиска

Содержание ThinkServer RD340

Отзывы:

Похожие инструкции для ThinkServer RD340

Бренды по названию

Популярные бренды

Lenovo ThinkServer RD340, Руководство пользователя и по обслуживанию

Результаты поиска

Содержание ThinkServer RD340

Отзывы:

Похожие инструкции для ThinkServer RD340

Бренды по названию

Популярные бренды