If you are replacing a server component or installing an optional device in the server, you need to take
out the node out from the rack enclosure, turn off the server and peripheral devices, and disconnect all
external cables.
To remove the node SATA cable, complete the following steps.
Step 1.
Remove the compute node (see “Removing a compute node from a chassis” on page 77).
Step 2.
Remove the air baffle (see “Removing the air baffle” on page 86).
Step 3.
Place your fingers on both ends of JPT1 and JP18; then, lift the SATA cable out of the server.
000
000
000
0000
0000
0000
00
00
00
0000
0000
0000
0000
0000
0000
0000
0000
0000
SATA / SAS
connectors
(JPT1/JP18)
Figure 98. SATA cable removal
Installing the node SATA cable
Use this information to replace the node SATA cable.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 75.
If you are replacing a server component or installing an optional device in the server, you need to take
out the node out from the rack enclosure, turn off the server and peripheral devices, and disconnect all
external cables.
To replace the node SATA cable, complete the following steps.
Step 1.
Align the node SATA cable in the proper locations and install it.
Removing and replacing server components
149
Содержание ThinkServer n400
