manualshive.com logo in svg

Lenovo ThinkServer n400, Инструкция по установке и обслуживанию

Lenovo ThinkServer n400 - сервер высокой производительности с множеством функций. Установочное и сервисное руководство доступно для бесплатного скачивания на manualshive.com. Наглядное обучение по настройке и обслуживанию этого мощного сервера поможет вам оптимизировать работу вашей компании.

Поделиться
Скачать
background image

•

Cooling and optional power capabilities

The server supports five speed-controlled simple-swap fans for a full configuration. The server comes
with two 1200 or 1600-watt hot-swap power supply installed. The server supports a maximum of two
1600-watt hot-swap power supplies. For redundancy support on hot-swap models, two power-supplies
must be installed in the server. Two power supplies enables continued operation if one of the power
supplies fails.

•

RAID support

The RAID adapter provides hardware redundant array of independent disks (RAID) support to create
configurations. The standard RAID adapter provides RAID levels 0, 1, and 10.

Notes:

1. One of the RAID levels must be chosen for configuration when the RAID adapter is installed.

2. During RAID rebuild process, HDD is considered as non-useable. HDD tray Amber LED will blink and

Global HDD status LED will be on. This EVENT will be logged in BMC. When the rebuild process is
completed, HDD tray Amber LED and Global HDD status LED will be off. User can refer to HBA utility
to confirm current HDD/RAID status.

•

Systems-management capabilities

The server comes with a TMM. When the TMM is used with the systems-management software that
comes with the server, you can manage the functions of the server locally and remotely. The TMM also
provides system monitoring, event recording, and network alert capability. The systems-management
connector for the TMM is located on the rear of the server.

•

UEFI-compliant server firmware

The UEFI firmware offers several features, including Unified Extensible Firmware Interface (UEFI)
version 2.1 compliance, enhanced reliability, availability, and serviceability (RAS) capabilities, and basic
input/output system (BIOS) compatibility support. UEFI replaces the BIOS and defines a standard
interface between the operating system, platform firmware, and external devices. The server is capable of
booting UEFI-compliant operating systems, BIOS-based operating systems, and BIOS-based adapters
as well as UEFI-compliant adapters.

Lenovo XClarity Administrator

Lenovo XClarity Administrator is a centralized, resource-management solution that simplifies infrastructure
management, speeds responses, and enhances the availability of Lenovo® server systems and solutions. It
runs as a virtual appliance that automates discovery, inventory, tracking, monitoring, and provisioning for
Lenovo servers, Flex System servers, and RackSwitch switches in a secure environment.

Lenovo XClarity Administrator provides a central interface to perform the following functions for all managed
endpoints.

•

Hardware management

Lenovo XClarity Administrator provides agent-free hardware management. It can automatically discover
manageable endpoints, including Flex System chassis and components, System x, NeXtScale, and
ThinkServer servers, and RackSwitch switches. Inventory of the discovered endpoints is also gathered,
so an at-a-glance view of the managed hardware inventory and status is possible.

•

Hardware monitoring

Lenovo XClarity Administrator provides a centralized view of all events and alerts that are generated from
the managed endpoints. When a CMM or IMM detects an issue, an alert or event is passed to the Lenovo
XClarity Administrator and is displayed in the events or alerts log. A summary of all alerts and events is
visible from the Dashboard and the Status bar. Events and alerts for a specific endpoint are available from
the Alerts and Events detail page for that endpoint.

•

Service and support

12

Lenovo ThinkServer sd350 Server Type 5493, Lenovo ThinkServer n400 Enclosure Type 5495Installation and Service Guide

Содержание ThinkServer n400















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkServer n400

NEC Express5800/T110g-E Quick Start Manual preview
Express5800/T110g-E
Бренд: NEC Страницы: 2
IBM Flex System x240 Compute Node Product Manual preview
Flex System x240 Compute Node
Бренд: IBM Страницы: 28
Oki ML590 Specification Sheet preview
ML590
Бренд: Oki Страницы: 2
Patton electronics 29XX Series Administrator'S Reference Manual preview
29XX Series
Бренд: Patton electronics Страницы: 326
AIC SB401-MN User Manual preview
SB401-MN
Бренд: AIC Страницы: 88
Hologic Cenova User Manual preview
Cenova
Бренд: Hologic Страницы: 30
Rasilient ApplianceStor 75 User Manual preview
ApplianceStor 75
Бренд: Rasilient Страницы: 24
Navico SonicHub 2 Installation Manual preview
SonicHub 2
Бренд: Navico Страницы: 2
Brother NC-100h Network User'S Manual preview
NC-100h
Бренд: Brother Страницы: 103
HP ProLiant BL460c Gen8 User Manual preview
ProLiant BL460c Gen8
Бренд: HP Страницы: 84
Fujitsu PRIMERGY RX200 S6 Options Manual preview
PRIMERGY RX200 S6
Бренд: Fujitsu Страницы: 84
IBM @server x Series Quick Setup Manual preview
@server x Series
Бренд: IBM Страницы: 8
Usl CMS-2200 Quick Start Manual preview
CMS-2200
Бренд: Usl Страницы: 4
Overland Storage SnapServer Expansion E2000 Quick Start Manual preview
SnapServer Expansion E2000
Бренд: Overland Storage Страницы: 5
Overland Storage SnapSAN S3000 User Manual preview
SnapSAN S3000
Бренд: Overland Storage Страницы: 133
Kathrein EXIP 414 Manual preview
EXIP 414
Бренд: Kathrein Страницы: 20
AirLive WFP-101UV2 User Manual preview
WFP-101UV2
Бренд: AirLive Страницы: 106
Adaptec Storage Manager User Manual preview
Storage Manager
Бренд: Adaptec Страницы: 188

Бренды по названию

Популярные бренды

Загрузить еще бренды