Lenovo THINKSERVER 3719 Скачать руководство пользователя страница 216

Страница: 216 / 304

4. Unlock and remove the side cover (see “Removing the left-side cover” on page

157).

5. Remove any adapters that are installed in the expansion slots (see “Removing

an adapter” on page 184).

6. Remove the system board and place it on a static-protective surface (see

“Removing the system board” on page 231).

Note:

Do not remove the DIMMs, heat sinks, microprocessors, VRM, or battery

from the system board.

7. Remove the two screws that secure the extender card to the system-board tray.

8. Pull the extender card out of the system-board connector.

9. If you are instructed to return the extender card, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to
you.

208

ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual

Содержание THINKSERVER 3719

















































































































































































































































































































Результаты поиска

Содержание THINKSERVER 3719

Отзывы:

Похожие инструкции для THINKSERVER 3719

Бренды по названию

Популярные бренды

Lenovo THINKSERVER 3719, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание THINKSERVER 3719

Отзывы:

Похожие инструкции для THINKSERVER 3719

Бренды по названию

Популярные бренды