Lenovo Storage N3310, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 126 / 152

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 112.
• After a system board is replaced, do the following:
1. Start the Setup Utility program by pressing the F1 key, and then check the BIOS and BMC version.
2. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to download the
latest version of firmware. Then, install the firmware to your storage product.
3. Update the machine type, model number, and serial number of the system board. Either you will
be prompted to do this while upgrading the BIOS, or you can locate the files for updating the VPD
within the DOS BIOS package. For some storage products, the VPD utility is available for download
at: http://www.lenovo.com/drivers.
Completing the parts replacement
This topic provides instructions to help you complete the parts replacement and turn on your storage product.
To complete the parts replacement, you must properly route the cables inside the storage product, reinstall
the storage product cover, reconnect all the external cables and, for some devices, update the firmware and
run the Setup Utility program to do further setup.
Reinstalling the storage product cover and reconnecting cables
Attention: Do not open your storage product or attempt any repair before reading and understanding “Safety
information” on page iii and “Guidelines” on page 41.
This topic provides instructions on how to reinstall the storage product cover and reconnect cables to
your storage product.
Attention: For proper cooling and airflow, reinstall the storage product cover before turning on the storage
product. Operating the storage product for extended periods of time (more than 30 minutes) with the storage
product cover removed might damage storage product components.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your storage product might look slightly different from the illustrations in
this topic.
To reinstall the storage product cover and reconnect cables to your storage product, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your storage product.
2. Ensure that all internal cables are routed correctly and secured by any cable clips or ties in the storage
product. Keep cables clear of the hinges and sides of the storage product chassis to avoid interference
with reinstalling the cooling shroud and the storage product cover.
3. If you have removed the cooling shroud, reinstall it. See “Removing and reinstalling the cooling shroud”
on page 46.
112
Lenovo Storage N3310 User Guide and Hardware Maintenance Manual