Lenovo Storage N3310 Скачать руководство пользователя страница 76

Страница: 76 / 152

5. Gently lift the plastic tab

that secures the ThinkServer RAID Super Capacitor Module. Then, slide the

ThinkServer RAID Super Capacitor Module as shown to completely remove it from the chassis.

Figure 28. Removing the ThinkServer RAID Super Capacitor Module

6. Remove the Super Capacitor Module from the holder.

Figure 29. Removing the Super Capacitor Module from the holder

7. If you are instructed to return the old ThinkServer RAID Super Capacitor Module, follow all packaging

instructions and use any packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 112.

Installing or removing a PCIe card

This topic provides instructions on how to install or remove a PCIe card, such as an Ethernet card, a RAID
card, or any other supported PCIe cards.

Lenovo Storage N3310 User Guide and Hardware Maintenance Manual

Содержание Storage N3310

























































































































































Результаты поиска

Содержание Storage N3310

Отзывы:

Lenovo Storage N3310, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения, Страница: 76 / 152

Результаты поиска

Содержание Storage N3310

Отзывы: