Lenovo Storage N3310, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения, Страница: 60 / 152

2. To reinstall the rack handles, align the five screw holes in the rack handle with the corresponding holes
in the chassis. Install the five screws to secure the rack handle on each side of the storage product.
Figure 15. Installing the rack handles
Removing and reinstalling the cooling shroud
To access some storage product components on the system board, remove the cooling shroud. To ensure
proper cooling and airflow, reinstall the cooling shroud before turning on the storage product.
Removing the cooling shroud
Attention: Do not open your storage product or attempt any repair before reading and understanding “Safety
information” on page iii and “Guidelines” on page 41.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your storage product might look slightly different from the illustrations in
this topic.
To remove the cooling shroud, do the following:
1. Remove all external media from the drives and turn off all attached devices and the storage product.
Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the storage product.
2. Prepare your storage product. See “Removing or extending the storage product from the rack cabinet”
on page 43.
3. Remove the storage product cover. See “Removing the cover” on page 43.
46
Lenovo Storage N3310 User Guide and Hardware Maintenance Manual