LeCroy ArbStudio, Руководство пользователя

Страница: 86 / 127

ArbStudio
86
918221 RevA
The following fields are available on the Clock Generator tab:
•
Enable ‐ Turns the Clock Generator Module on or off.
•
Frequency ‐ Sets the frequency (MHz) of the Clock Generator. The output frequency depends on the
Sample Rate set by the user on the Setup Device Timing tab.
Note : User entries can be recalculated to allow frequency values.
•
Duty Cycle ‐ Sets the generated clock duty cycle of the clock signal.
Note : User entries can be recalculated to allow duty cycle values.
•
Delay ‐ It sets the delay to the synchronized signal.
Note : User entries can be recalculated to allow delay values.
•
Strobe Operation ‐ Lets you logically combine the Output clock with the Extended Trigger In vector.
Possible options are: NOP , OR , AND , XOR , NOT , NOR , NAND , XNOR , FORCE LOW , and FORCE HIGH .
Pattern Settings - The Trigger In Tab
Set Trigger In parameters using the Trigger In tab.
S
OURCE
C
ONNECTOR
Select the physical source for a Trigger In event. The possible options include:
•
BNC Trigger IN ‐ The trigger event is received by the dedicated BNC Connector on the instrument front
panel.