LeCroy ArbStudio, Руководство пользователя

Страница: 48 / 127

ArbStudio
48
918221 RevA
•
Use the Type drop ‐ down and select DC Level , Sine , Increase Ramp , Sawtooth , Rectangle , or Triangle .
•
Use fields on the Timing section to set Length , Frequency , and Cycle parameters.
•
Fields on the Parameters section can be used to set Amplitude , Offset , Phase , Maximum and Minimum
Voltage levels
•
Click the OK button to create the waveform and add it to the project.
Creating an Advanced Waveform
Create a complex waveform in the Waveform Sequencer by clicking the Add Advanced Waveform button.
Like Standard Waveform Creation, the Waveform Editor dialog box is again shown.
ArbStudio handles Waveforms, Segments, and Components in the following manner.
W
AVEFORMS
•
Standard Waveform ‐ A basic waveform like DC Level, Sine, Increase Ramp, Triangle, Sawtooth, or
Rectangle.
•
Advanced Waveform ‐ A sequence of elementary waveforms, or segments. A Waveform contains the
temporal order by which the segments are generated (and the number of repetitions for each segment).
A segment is a combination of components.