LeCroy ArbStudio, Руководство пользователя

Страница: 43 / 127

Getting Started Manual
918221 RevA
43
Multi Device Deskew Delay (1104 with Expansion Bus option only)
This parameter can set a fine delay between multiple devices in order to compensate the skew between the
outputs belonging to different devices.
The skew delay is only active on Slave devices and can add a positive delay respect to the Master.
When deskewing the channel delay of a slave device with respect to the master, the Multi Device Deskew delay
must be used in conjunction with the trigger delay. Multi Device Deskew delay sets a fine delay and can only be
positive, while the trigger delay sets a normal delay and can also be slightly negative.
The deskew delay is only effective when all devices work with the same sampling frequency that must be in the
following list: 250 MHz, 200 MHz, 150 MHz, 100 MHz, 75 MHz, 50 MHz, 37.5 MHz, 25 MHz.
The Channel Out Math Tab
You can set a communication between adjacent channels allowing computations to be performed between
generated waveforms or between a waveform and a constant.
•
Use the radio button to Enable operation on a channel pair.
•
Select the channel where the operation result is to be performed. The selected channel is the Receiver
(RX) and the other one is the Transmitter (TX).