LeCroy ArbStudio, Руководство пользователя

Страница: 11 / 127

Getting Started Manual
918221 RevA
11
Front Panel
Numbered callouts on this image correspond with the following descriptions.
Figure 3 ‐ 1. This is an image of the ArbStudio 1104 model and therefore has a POD B connector and two additional
Channel Outputs. Although digital pods appear on all models, they are only active on 1102D and 1104D models.
DIGITAL POD A / DIGITAL POD B
1. DIGITAL POD A / DIGITAL POD B
•
Pod A and Pod B – Digital probe connectors.
Note : DIGITAL POD B is only available on ArbStudio 1104. POD A and POD B are only active on
1102D and 1104D models. ArbStudio 1102 and 1104 can be upgraded to include the digital
pattern generator.
2. EXT CLK
•
EXT CLK In ‐ BNC input connector for external clock.
3. TRIGGER
•
Trigger Out ‐ BNC output connector for Trigger OUT.
•
Trigger In ‐ BNC input connector for Trigger IN.
4. ANALOG OUTPUTS
•
Ch1, Ch2, Ch3, Ch4 ‐ Open ‐ 12V to 12V, ‐ 6 to 6V on 50 Ω Load.
Note : Ch3 and Ch4 are only available on ArbStudio 1104 and 1104D models.
5. STATUS LED
Indicates instrument power status.
6. POWER ‐ ON LED
Indicates the power status of the instrument. The status led can be OFF , ON , or Blinking denoting the
following conditions:
OFF
The instrument is ON and connected to a PC, but drivers have not been installed.
ON
The instrument is ON, connected to a PC, and correctly configured.
B
LINKING
The status led is Blinking when the ArbStudio 1102/1104 is uploading firmware for channels.