Langmatz EK 533, Руководство по эксплуатации

Страница: 42 / 60

42
"Operating voltage limits" tab
• This is where you set the voltage ranges
for all six inputs.
Fig. 66
Loading and saving configurations
Fig. 67
• EK 533 plus configurations are
maintained in files with the file ending
".ek 533p". These contain all settings for
the device (parameters and sounds).
• You can transfer existing configuration
files from the PC to the EK 533 plus.
• You can create new configuration files
by reading out an EK 533 plus.
• To read out the EK 533 plus (save its
configuration to a file), make the
following selections:
• "File" - "Parameter set" - "Read
(crossguide -> file)".
• Select and save the required functions.
• "All"/"Parameters only"/"Sounds only".
• Enter the desired save location and file
name in the dialogue box that appears.
• To transfer existing configuration files to
an EK 533 plus, make the following
selections: "File" - "Parameter set" -
"Write (file - crossguide)".
• Select the required function.
• "All"/"Parameters only"/"Sounds only".
Note!
This process overwrites the entire existing
device configuration (sounds and
parameters)!