Langmatz EK 533, Руководство по эксплуатации

Страница: 38 / 60

38
Signal prolongation
• If the box is checked, the signal can be emitted from the corresponding output for as long as
the respective button (PB/S or VPB) is pressed and held. In other words, this means for longer
than is indicated under "PB/S (ms)" or "VPB (ms)" respectively.
• If the box is not checked, the pulse on the output concerned is emitted only for as long as
specified under "PB/S (ms)" or "VPB (ms)", even when the button (PB/S or VPB) is pressed
and held.
"Feedback" tab
• This tab is for configuring optical
feedback.
General note:
Optical feedback is triggered by
• pressing the PB/S or VPB (internally
produced optical feedback)
• core 4 (produced by the control unit)
• or through networking.
Fig. 61