Langmatz EK 533, Руководство по эксплуатации

Страница: 29 / 60

29
Activation
– acknowledgement signal:
Specifies how the acknowledgement signal is activated. The following options are available:
• off: The acknowledgement signal is deactivated and does not sound.
• PB/S: The acknowledgement signal sounds if the large-surface push-button is pressed or the
large-surface sensor is actuated during the red phase.
• VPB: The acknowledgement signal sounds if the vibrator push-button is
pressed during the red phase.
• PB/S/VPB: The acknowledgement signal sounds if the large-surface push-button, large-surface
sensor or the vibrator push-button is actuated during the red phase.
Duration (s):
You can use this selection box to specify whether the relevant signal or the vibrator is actuated
continuously
– "cont." (default) – or for 1 to 60 seconds.
The activation conditions above still apply. This means, for instance, that to play the orientation
signal on the "Red signal" setting, the red signal must be present as described and the sound is
only played for the duration of the signal. If you set a duration of 50 s but the red signal is only
present for 30 s, then the sound will only play for 30 s as well.
Speakers:
Fig. 42
Specifies which speaker is used for the
signal output:
• "external 1": The signal sounds on the
1st external speaker of the
EK 533 plus 2.0.
• "external 2": The signal sounds on the
2nd external speaker of the
EK 533 plus 2.0.
• "both": The signal sounds both on the
1st external speaker and on the 2nd
external speaker of the EK 533 plus 2.0.
• There is an option to add the internal
speaker to the 2nd external speaker.
• To do so, switch "S1" is pushed
downwards (as-delivered condition).
Fig. 43
S1