Langmatz EK 533, Руководство по эксплуатации

Страница: 21 / 60

21
2) CrossCom USB
a. Make sure that cgManager has not started.
b. Plug the connector into the Langmatz EK 533 plus.
c. Connect the USB connection to your PC.
d. If you are using the cable for the first time on this PC, Windows will now attempt to install
the USB-to-RS232 driver. If Windows prompts you to specify the path to the driver, insert
the driver CD and select it.
e. Once you have completed the driver installation, you can start cgManager.
f. Select the correct interface.
Notes
Fig. 26
• Installing the driver may require
administrator access rights.
• You can use the Windows Device
Manager to check which Windows COM
interface the driver has been assigned
to.
• If the USB cable is unplugged while
cgManager is still active, you will need
to restart it in order to establish a
connection.
• If the USB port on the PC is changed,
the interface needs to be re-selected
as it has been assigned a different
number by Windows.
3) CrossCom Bluetooth
a. Make sure that cgManager has not started.
b. Connect the CrossCom Bluetooth connector to the EK 533 plus device.
c. Connect the CrossCom Bluetooth USB stick (item no. 125330999) to the PC (see notes!).
d. If the USB stick is being connected to the PC for the first time, Windows will attempt to
install the appropriate driver. If Windows prompts you to specify the path to the driver, insert
the driver CD and select it.
e. Once you have completed the driver installation, you can start cgManager.
f. Select the correct interface.
Notes
• Installing the driver may require administrator access rights.
• Generally speaking, you will not need to install the driver or use the external Bluetooth
USB stick if the PC already has a Bluetooth module installed.
• To prevent connection issues, ensure that the PC and the Langmatz EK 533 plus are
as close to each other as possible.
• If your connection is poor, opening the "Parameters" form in cgManager may return
an error. If this is the case, try reopening the form.
• Once the "Parameters" form is open, we recommend that you click the "Read" button
again to prevent synchronisation problems (cgManager - Langmatz EK 533 plus).