LANDINI 5860, Руководство по эксплуатации и обслуживанию

Страница: 99 / 132

95
Technical specifications
Seat
Padded seat with adjustable suspension. The seat has a
device to regulate the suspensions and distance from
controls, both vertically and horizontally.
Bonnet
Robust stamped plate bonnet in a single piece. The
side panels can be easily opened for access to the
battery and air filter.
Safety frame
Approved safety frame in compliance with international
OECD standards.
The nuts and bolts of the safety frame should be
tightened to a 9 daNm torque.
Electrical system
Voltage rating: 12 V negative earth.
Alternator
Type ................................................................ 55 Amp/h.
Max. power at 2200 RPM engine rate ................. 500 W.
Built-in automatic voltage regulator.
Remote charge indicator.
Starter motor
Continuous power ................................................ 2.5 W.
Automatic pinion engagement by electromagnet.
Battery
“Maintenance Free” type. Complies with SAE J537
standards. Specifications:
5860 6060
Cold starting surge at -18°C in 30 seconds .......... 600 A
Charge for 20 hours: .............................................. 72 Ah
Charge reserve .................................................. 120 mm.
6860-7860-8860
Cold starting surge at -18°C in 30 seconds .......... 600 A
Charge for 20 hours: .............................................. 92 Ah
Charge reserve .................................................. 170 mm.
Hydraulic power lift
Controls draft, position and, in the “Intermix” mode,
both draft and position. Also operates in float mode.
Two independent control levers: sensitivity regulation,
oil draw for single-acting external rams. Open-center
hydraulic circuit with gear pump operated by the timing
gears. Gauze filter on the pump intake.
Pump flow rate with engine at top rate.
5860-6060: at 2250 RPM ............................... 38.6 l/min.
6860-7860-8860: at 2200 RPM. ..................... 42.3 l/min.
•Pressure limiting valve setting .......................... 170 bar
Max. lifting capacity at the end of the articulated links in
a horizontal position:
•without supplementary cylinders....................2400 Kg.
•with 2 supplementary cylinders (7860-8860).3650 Kg.
Three point linkage
Class 2 three point linkage. Vertical link with adjustable
jack. Left-hand vertical link with two-position top end:
one fixed and the other sliding. Adjustable stabilizers.
Towing devices
• Class “C” rigid rear tow hook, adjustable in height: 4
positions.
• Class “A” rear tow hook with swinging drawbar
(optional, as an alternative to Class “C” tow hooks).
• Front tow hook (on request).