LANDINI 5860, Руководство по эксплуатации и обслуживанию

Страница: 113 / 132

109
7860HC - 8860 HC
Routine maintenance
Ball joints for 4WD steering cylinder
Have an authorized workshop check the ball joint fixing
nut (C) torque after the first 50 hours and following this,
after every 1000 hours service (Fig. 83)
Rear Final Drives
Variable maintenance
Remove plug (A) to check the oil level. Top up the level
through the same plug (Fig. 84)
1000 hours
(Fig. 84) Remove the plug (B) and allow the oil to drain
out.
Pour in oil of the recommended type through fill plug
(A) until reaching the level of the plug itself.
Fig. 83
Fig. 84
Ground speed table with 13.6R38 tyres and 2200 RPM engine rate
Range Gear Standard Reverse Creeper Underdrive
Forward shuttle
1 1.714 1.731 0.335 1.421
2 2.694 2.721 0.526 2.233
Low
3 3.402 3.436 0.624 2.820
4 5.020 5.071 0.980 4.161
1 4.094 4.135 0.799 3.393
2 6.435 6.500 1.256 5.333
Standard
3 8.128 8.210 1.587 6.737
4 11.991 12.112 2.341 9.939
1 10.101 10.203 1.972 8.372
2 15.874 16.034 3.096 13.157
High
3 20.005 20.257 3.915 16.622
4 29.565 29.864 5.771 24.505