5
Special character and underscore(_) are not allowed.
Adding a New Group to VLAN mapping entry:
Click to add a new entry in mapping table. An empty row is added to the table; Frame Type, Value and the Group Name
can be configured as needed.
The button can be used to undo the addition of new entry.
Save:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Refresh:
Refresh the Protocol Group Mapping information manually.
Group to VLAN
This section allows you to map an already configured Group Name to a VLAN for the selected switch.
Web Interface
To display Group Name to VLAN mapping table configured in the web interface:
1. Click Group Name VLAN configuration and add new entry.
2. Specify the Group Name and VLAN ID.
3. Click Apply.
Figure 3-12.7.2: The Group Name of VLAN Mapping Table
Parameter description:
Delete:
To delete a Group Name to VLAN map entry, check this box. The entry will be deleted on the switch during the next Save
Group Name:
A valid Group Name is a string of at most 16 characters which consists of a combination of alphabets (a-z or A-Z) and
integers(0-9), no special character is allowed. whichever Group name you try map to a VLAN must be present in Protocol
to Group mapping table and must not be used by any other existing mapping entry on this page.
93
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
