Lancom GS-2310P Скачать руководство пользователя страница 168

Страница: 168 / 217

Rx and Tx Lease Query:

The number of lease query (option 53 with value 10) packets received and transmitted.

Rx and Tx Lease Unassigned:

The number of lease unassigned (option 53 with value 11) packets received and transmitted.

Rx and Tx Lease Unknown:

The number of lease unknown (option 53 with value 12) packets received and transmitted.

Rx and Tx Lease Active:

The number of lease active (option 53 with value 13) packets received and transmitted.

Auto-refresh:

Activate the auto-refresh to refresh the information automatically.

Refresh:

Refresh the DHCP Snooping Port Statistics manually.

Clear:

Clear the entries.

5.4 DHCP Relay

The section describes how to forward DHCP requests to another specific DHCP servers via DHCP relay. The DHCP servers
may be on another network.

5.4.1 Configuration

This section describes how to configure DHCP Relay setting including:

Relay Mode (Enabled and Disabled)

Relay Server IP setting

Relay Information Mode (Enabled and Disabled)

Relay Information Mode Policy (Replace, Keep and Drop)

To configure a DHCP Relay in the web interface:

1. Select “Enabled” in the Relay Mode of DHCP Relay Configuration.

2. Specify Relay Server IP address.

3. Select “Enabled” in the Relay Information Mode of DHCP Relay Configuration.

4. Specify Relay (Replace, Keep and Drop) in the Relay Information Mode of DHCP Relay Configuration.

5. Click Apply.

Figure 5-4.1: The DHCP Relay Statistics

168

LANCOM GS-2310P/GS-2326(P) User Manual

5 Security

Содержание GS-2310P


























































































































































































































Результаты поиска

Содержание GS-2310P

Отзывы:

Lancom GS-2310P, Руководство пользователя, Страница: 168 / 217

Результаты поиска

Содержание GS-2310P

Отзывы: