Lancom GS-2310P Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 217

background image

The counter indicates the number of times the ACE was hit by a frame.

Conflict:

Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware
limitations.

Auto-refresh:

Activate the auto-refresh to refresh the information automatically.

Refresh

Refresh the ACL status information manually.

3.3 Aggregation

You can bundle more than one port with the same speed, full duplex and the same MAC to be a single logical port, thus
the logical port aggregates the bandwidth of these ports. This means you can apply your current Ethernet equipment’s
to build the bandwidth aggregation. For example, if there are three Fast Ethernet ports aggregated in a logical port,
then this logical port has bandwidth three times as high as a single Fast Ethernet port has.

3.3.1 Static Trunk

The Aggregation Configuration is used to configure the settings of Link Aggregation. You can bundle more than one
port with the same speed, full duplex and the same MAC to be a single logical port, thus the logical port aggregates the
bandwidth of these ports. This means you can apply your current Ethernet equipment’s to build the bandwidth aggregation.

3-3.1.1 Static Trunk

Ports using Static Trunk as their trunk method can choose their unique Static GroupID to form a logic “trunked port”.
The benefit of using Static Trunk method is that a port can immediately become a member of a trunk group without any
handshaking with its peer port. This is also a disadvantage because the peer ports of your static trunk group may not
know that they should be aggregate together to form a “logic trunked port”. Using Static Trunk on both end of a link is
strongly recommended. Please also note that low speed links will stay in “not ready” state when using static trunk to
aggregate with high speed links.

Web Interface

To configure the Trunk Aggregation Hash mode and Aggregation Group in the web interface:

1. Click Configuration, Static Trunk, and then Aggregation Mode Configuration.

2. Activate to enable or disable the aggregation mode function.

Activate Aggregation Group ID and Port members

3. Click Apply to save the setting

4. If you want to cancel the setting then you need to click the reset button. It will revert to previously saved values.

Figure 3-3.1.1: The Aggregation Mode Configuration

28

LANCOM GS-2310P/GS-2326(P) User Manual

3 Configuration

«
...
26
27
28
29
30
...
»

Содержание GS-2310P


























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GS-2310P

Бренд: D-Link Страницы: 5

Бренд: D-Link Страницы: 2

PG-FlexPlus AMU-912

Бренд: ADC Страницы: 130

totalstorage 200

Бренд: IBM Страницы: 180

MultiConnect SE MTS2EA

Бренд: Multitech Страницы: 8

Бренд: Ubiquiti Страницы: 20

Бренд: AMG Systems Страницы: 2

Бренд: Xantech Страницы: 16

PacketMate 1000

Бренд: General DataComm Страницы: 20

Бренд: Valcom Страницы: 4

Бренд: Paradyne Страницы: 74

Бренд: ALIBI Страницы: 232

Бренд: Tenda Страницы: 82

Бренд: Ryobi Страницы: 44

Бренд: Linksys Страницы: 2

Edge-Core A07-ES4548C

Бренд: Atlantis Land Страницы: 2

Бренд: MAKER MADE Страницы: 40

Бренд: ADTRAN Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды