Web Interface
To configure the Spanning Tree MSTI Priorities parameters in the web interface:
1. Click Configuration, Spanning Tree, MSTI Priorities
2. Scroll the Priority maximum is 240. Default is 128.
3. Click "Save" to save the settings.
4. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values
Figure 3-4.3: The MSTI Configuration
Parameter description:
MSTI:
The bridge instance. The CIST is the default instance, which is always active.
Priority:
Controls the bridge priority. Lower numeric values have better priority. The bridge priority plus the MSTI instance number,
concatenated with the 6-byte MAC address of the switch forms a Bridge Identifier.
Buttons
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.4.4 CIST Ports
When you implement a Spanning Tree protocol on the switch that the bridge instance. You need to configure the CIST
Ports. The section describes how the user to inspect to inspect the current STP CIST port configurations, and possibly
change them as well.
Web Interface
To configure the Spanning Tree CIST Ports parameters in the web interface:
1. Click Configuration, Spanning Tree, CIST Ports
2. Set the parameters of the CIST Aggregated Port Configuration.
3. Enable or disable the STP, then set the parameters of the CIST normal Port configuration.
4. Click Apply to save the settings.
5. If you want to cancel the settings then you need to click the Reset button. It will revert to previously saved values.
37
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
