18
Sold-Out Feature
Ready - signifies there is available product and the
valve will dispense when activated
Out - signifies there is no available product or there is
a problem with the specified brand and will dispense
when activated.
Auto - signifies that the configured Sold Out Sensor
controls whether the brand can be dispensed. This
feature requires an optional sold out sensor kit,
does not come standard, and is available for up to
ten (10) brands at one time. The following is a set of
instructions on how to set up this feature. If no sold
out sensor is assigned then the Auto feature acts the
same as the Ready feature.
NOTE
1.
From the Service Menu, press the Sold Out button.
2.
Manually adjust specific brands to read Ready, Out, or Auto
This feature will automatically shut-off the pump for
that specific brand when there is no product to be
dispensed. This feature only comes into effect when
the corresponding brand is changed to “Auto” in the
Sold-Out menu.
NOTE
A. Sold Out Sensors Tab
B. Sold Out Sensors 1-10
C. CO
2
Low Pressure Indicator
A
B
B
C
3.
From the Service Menu, press the Configuration button.
4.
To add the Auto Sold Out feature to a specific brand, press
and hold one of the Sold Out Sensors and drag them to a
corresponding brand.
5. If a Sold Out Sensor is utilized for the CO
2
low section, as
shown in the image to the right, then the CO
2
Low Pressure
Indicator will appear whenever the unit or a valve is not
recieving enough CO
2
.
6. Press the Menu button to return to the Service Menu.
