Laguna Tools CNC Swift Series, Руководство пользователя

Страница: 30 / 55

LAGUNA TOOLS 30
4. Select a starting location.
4.1 The touch probe needs to be between ¼” to 1”
away. These values can vary depending on the "First
Forward Move" setting located in the outline scan
window.
4.2 Lower the probe on the z ‐ axis so that the probe
stylus will make contact with the part when
scanning.
4.3 Unique to the edge scan is that there is no
restriction on the starting location.
Note: Depending on the starting location, the X and Y
scan directions will be affected. These settings can be
adjusted in the outline scan dialog box.
5. Open the outline scan dialog box.
6. Adjust the necessary settings in the dialog box.
6.1 Select the output file type. DXF or CSV file.
DXF File format is conventional across CAD
software.
6.2 Must click browse to select a
destination for the output file.
File will not save otherwise.
Figure 42. Starting location for an edge scan
Figure 43. Navigation to the edge scan window
Figure 44. Edge scan window overview