Laguna Tools CNC Swift Series, Руководство пользователя

Страница: 28 / 55

LAGUNA TOOLS 28
5. Manually position the probe to the corner that will
serve as the X0,Y0 work coordinates, in other words
the negative ‐ most corner. The probe will travel in the
positive X and Y direction.
6. Set the local zero for the X and Y axes by pressing the
"Set XY" button.
Note: Step 6 is not necessary to execute a 3D ‐ Scan. If the probe needs to be
repositioned at the same starting location, setting the local zero for X and Y will allow
for accurate repositioning.
7. Open the 3D ‐ Scan dialog box.
7.1 Go to File

Digitize

Automatic
8. There are multiple settings that must be
chosen before proceeding.
8.1 Probe Type ‐ The touch supplied will be
be the Up/Down/Side option.
8.2 Axis ‐ Choose the axis for width,length
and retract. The default settings are
conventional.
8.3 Area – The area dimensions that are to
be scanned.
8.3.1 Retract ‐ This will need to be set if
an up/down probe is being used.
The retract height must be set
higher than the highest point on
the scan area.
8.4 Increment/Resolution ‐ The distance
between sample points. The smaller the
increment (Ex. 1/64") the more detail the
scan will output but the scan time will
increase.
Figure 37. Starting location for a 3D scan
Figure 38. Navigation to 3D scan window
Figure 39. 3D scan window overview