Laguna Tools CNC Swift Series, Руководство пользователя

Страница: 41 / 55

LAGUNA TOOLS 41
**A G92XY is required after the L10 Line for the cut array to work.
X# is the units to move the x axis before starting the next cut.
Y# is the units to move the y axis before starting the next cut.
R# is the number of rows.
C# is the number of columns.
Example: L10 r5 c5 x4 y4 e1 or L10 r1 c4 x6 y0
G92xy G92xy
G90 G90
G01 x3 m98 Texas.tap
G01 y3
G01 x0 **End with L10 if using more
G01 y0 than one L10 array.
L11 Set Axis Mapping - L11 XYZW
Allows re-mapping of axis inputs. Specify the axes that should receive the input from XYZW in that order.
Specify L11 alone to return to normal parsing.
Example: L11 XYWZ swaps the W and Z axes, L11 XYZZ moves Z and W together.
L12 Set Axis Mapping - L12 ZW
Allows re-mapping of axis inputs. Specify the axes that should receive the input from ZW in that order. This
command works like L11 except that the XY inputs are not used. Specify L12 alone to return to normal
parsing.
Example: L12 WZ swaps the W and Z axis, L12 ZZ moves Z and W together.
L13 Set Axis Mapping - L13 XYZW
Allows re-mapping of axis on a pulse basis. This means when the controlling axis takes a step, the slave will
follow in that direction Specify L13 alone to return to normal mapping.
Examples:
L13 ZW (Z is controlling axis, W follows Z.)
L13 WZ (W is controlling axis, Z follows W.)
L13 XY (X is controlling axis, Y follows X.)
L20 Enable Soft Limits - L20 [X1, X2]
Enable Soft Limit and Boundary Checking: L20 X1 enables Boundaries only. L20 X2 enables Soft Limits only.
L20 alone enables both.
L21 Disable Soft Limits
Disable Soft Limit and Boundary Checking Soft Limits and Boundaries are used to define a cutting area which
is checked during parsing of a file or command. This effectively keeps the machine from moving out of a
defined area. L21 disables Soft Limit and Boundary checking.
L22 Set Low Boundaries - L22 X# Y# Z# W#
Set Low Boundaries to values specified. If no values are given then all Low Boundaries are set to
WINCNC.INI defaults.
L22.1 Restore Low Boundaries - L22.1 XYZW
Restores default Low Boundaries to the specified axes.
L23
Set High Boundaries - L23 X# Y# Z# W#
Set High Boundaries to values specified. If no values are given then all High Boundaries are set to