Laguna Tools CNC Swift Series, Руководство пользователя

Страница: 44 / 55

LAGUNA TOOLS 44
L70 Re-Enter Last Command
When L70 is used in a file, the last used command will automatically be re-entered on the command line after
file completion.
L82 Measures the Surface - L82 Z#
L82 Z# measures the surface with the probe and sets the measured point to the Z value given.
L82 alone will set the measured point to Z0.
L82.1 Sets the Surface for Probe Digitization
Sets a G92 for vertical axis based on the L82.3 calibration.
L82.2
Moves the Surface for Probe Digitization
Adjusts G92 positions set by the last L82.1 based on a new measurement.
L82.3 Calibrate Digitizing Probe
Calibrates, or stores, the distance from the probe contact point to the table surface.
L83
Measures Z Depth - L83 X# Y#
L83 command will do a one-shot Z probe at the specified location, and record the XYZ position values in a
comma delimited text file named SCAN.CSV. Where X# and Y# specify the (X,Y) coordinates to move to
before doing the depth probe.
L90
One Time Absolute
L90 is used in a command to specify G90 coordinates on one line without changing program mode to G90.
L91 One Time Relative
L91 is used in a command to specify G91 coordinates on one line without changing program to G91.
L92 Cancel G92 Restore
The current G92 Local Coordinate system is saved every time a program is started or a subprogram is called
using M98. When the program is finished, the original G92 system is restored. This is not desirable if the
program is being used to preset a system configuration for other programs. L92 causes the normal G92
coordinate restore to be skipped after the program containing the L92 is finished.
L110 Tool Change - L110 T#
Sets current tool number for machines with an automatic tool changer. The tool number is available as {TP1}
in subsequent commands, or {TN1} and {TN2} for dual tool changer machines.
The stored tool measure is reloaded for the new tool.
(See M37 command for storing tool measures)
L111
Test Tool Number - L111 T#
Run next line if tool number is equal to T#.
L111.1 Test Tool Number with Dual Tool Changers - L111.1 T#
Run next line if both tool numbers are equal to T#.