Laguna Tools CNC Swift Series, Руководство пользователя

Страница: 52 / 55

LAGUNA TOOLS 52
BMP File Invalid Header Tried to open an incompatible bmp file.
Boundary Exceeded Move specified would result in the head being moved outside the
workspace boundaries.
CNC.MAC Not Found The CNC.MAC file is not found.
Command Not Implemented This command has not yet been fully implemented.
Continuing..... Motion is continuing.
Could Not Open File Requested file could be opened. May be in use by another program.
D/A Not Enabled D/A channel is not set up in the WINCNC.INI file.
Demo Count Exceeded Demo mode only. 25 commands have been completed.
Depth Must Be Lower Than Retract Tried to retract a tool to a height that was below current depth.
Device Not enabled The requested device is not enabled.
Digitizer Probe Not Enabled The digitizer probe feature has not been enabled.
Error - Syntax - Command or File Not
Found Non-supported code or invalid file name entered.
Errors Reading CNCSCRN.INI The CNCSCRN.INI file contains errors or is not found.
Errors Reading WINCNC.INI The WINCNC.INI file contains errors or is not found.
Escape Button Pushed While Running User has aborted motion with the ESC key.
File Not Found The specified file name cannot be found.
File Not Found A specified file cannot be found.
Finished Running “Filename” The file “Filename” is complete or has been aborted.
Forced Limit Exceeded Move specified would result in the head being moved outside the forced
limits.
Helical Interpolation Not Supported No Z or W moves during an arc.
Illegal Value The value specified is invalid.
Invalid L10 Command L10 command has invalid parameters.
Invalid P1 Command P1 command has invalid parameters.
Key Error # A software key read error has occurred.
Key Not Found The software key cannot be found.
L10 in Subprogram L10 command found in subprogram.
Limit Switch Limit switch encountered while running.
Line Too Long Input line more than 256 characters.
Macro Expansion Error Occurs when macro commands exceed 256 characters.