LAGUNA
TOOLS
43
L36.1
Auto Voltage Set Mode On.
L36.2
Reset Auto Voltage Set Status.
L37
Torch Height Control Off.
L37.1
Auto Voltage Set Mode Off.
L38
Torch On.
L39
Torch Off.
L40
Feed Rate Override - L40 P#
Allows user to set the feed rate override by command. P must be within the bounds specified in the INI file. If
not, the command is ignored. The L40 command without a P# resets the feed rate to the default.
L41
Shell Command - L41 C:\Path\Program.exe
Allows the user to run an executable program from within WinCNC.
NOTE:
There is no error reporting for this command. If the path or filename are incorrect the command will
fail without aborting.
L48
Laser Height Control
Sets the target voltage to the current input voltage.
L51
Set D/A - L51 V# P# S#
Sets the output voltage for DA. The V parameter is used to set the DA by voltage, the P to set the DA by a
Percentage, and the S is used to set the DA by spindle speed. ONLY 1 PARAMETER CAN BE USED.
L53
Laser Height Control
Sets the target voltage to the current input voltage.
L55
Pump Velocity Mode On
Enables velocity matched pump control.
L56
Pump Purge Mode On
Sets pump to purge mode.
L57
Pump Off
Stops the pump.
L58
Pump Off with Auto Reverse
Stops the pump, using auto reverse.
L59
Set Up Pump Max - L59 M#
Sets the pump max to the specified M parameter.
L60
Turn Virtual Input Off - L60 C#
Turn specified virtual input off, # can be 1-64.
L61
Turn Virtual Input On - L61 C#
Turn specified virtual input on, # can be 1-64.
Содержание CNC Swift Series
Страница 54: ...LAGUNA TOOLS 54 SPECIFICATIONS...