Label NEPTIS/LE, Руководство по установке

Страница: 12 / 40

12
10.0 EXTENSION SHAFT
Where the conical shaft height should be not sufficente for the
application,
Is available an extension shaft (optional) to increase this height.
For available heights refer to paragraph 7.0
First of all deconnect the arm from the conical connection by unscrew
the two head screws.
Set the extension shaft in the conical connection like in figure.
Remember to keep the main screw inside conical connection.
Fix the extension shaft on the conical connection by two screw supplied
with the extension.
Set the arm on the extension and fix to it by the two original screws.
About arm connection and arm removal refer to previous paragraphs.