Label FEED NAVIGATOR, Руководство пользователя

Страница: 33 / 92

3.3 - HOW TO EXECUTE A RECIPE
The Recipe Execution Activity allows the previously programmed Recipes in the Recipe
Programming Activity or the Recipes transferred in the equipment through the Data
Transfer Function to be performed. The selection of the Recipe to be executed is carried
out in the Recipe Programming Activity.
The operation is determined by the settings, in the Technical Procedures of the following
Preferences: Display Resolution, Unit of Weight, Decimal Places, Language, Reciping
Mode, Automatic Tracking, Prealarm Threshold, Queue Time, Weight Displaying and
Motion. The following operation is described considering that the Preferences are
programmed with the default settings.
1. In the Recipe Programming Activity select the Recipe to be executed and press
the
Prog./Start
key. The AUT. symbol and the [
START
] message will appear on
the display. If the current Recipe has been programmed with the Feed Refusal
Adjustment Function, after the [
START
] message, the [
REF. ADJ.
] message will
appear. If the current Recipe has been programmed in “Daily” mode, after the
[
START
] message the [
MEAL 1
] message will appear if the morning ration is being
prepared, or the [
MEAL 2
] message if the afternoon ration is being prepared.
r
Important: if the current Recipe is programmed with the Feed Refusal Adjustment
but the programming order (all the Loads followed by all the Unloads) is not followed,
the Recipe will be prepared without the Feed Refusal Adjustment.
r
r
Important: if the Reciping Mode Preference (code 65) is programmed as
percentage, signalled on the display by the lighting up of the REC.% symbol, before
beginning the load and unload operations, it is necessary to program the Recipe
Total Weight for Recipes by Totals, and the Total Weight of the Single Animal for
Recipes by Animal Number. To program the weight use the
q z
(
e
) keys or the
Alphanumeric Writing (
2FN
). If the weight is programmed using the
q z
(
e
) keys,
press the OK key to confirm the start of the weighing operation.
r
r
Important: if during the Recipe Execution Activity the equipment switches off
accidentally due to a voltage drop, the next time the equipment is turned on the
[
PW. FAIL
] message will appear for 3 seconds on the display to indicate that the
equipment was automatically switched on after a voltage drop; after those 3 seconds
the equipment will automatically return to the point it was in when the power
interruption occurred. If the Power Output Preference (code 52) is set to Extractor,
press the
OK
key to eliminate the error message [
TOLER.
] from the display.
r
chApter