Label FEED NAVIGATOR, Руководство пользователя

Страница: 35 / 92

r
Important: if the Motion Function is enabled (code 74), when the Queue Time
expires the skip to the next Ingredient/Unload will occur only if the displayed weight is
stable.
r
5. If Automatic Mixing is programmed, the operation will be interrupted in the previously
established position and will resume at the end of the programmed time.
The display will light up the
d
symbol and the [
MIXING
] or [
MIXADJ
] messages
will appear alternately with [ x ], where x indicates the programmed mixing time; at
the same time the alarm output will be activated 5 times.
�
To begin the execution of the Automatic Mixing press the
OK
key.
The [
TIMER
] and [
MIN.
x ] messages will appear alternately on the display, where
x indicates the decrease of the programmed time. At the end of the decrease the
[
END
] will appear on the display and the equipment will activate the alarm output 5
times. After, the Recipe execution will resume with the display of the next Ingredient/
Unload. To interrupt the Automatic Mixing at any time, press the
Clear key for 2
seconds. The [
STOP
] message will appear on the display.
6. If the Tolerance Function is enabled, after the Queue Time, the equipment will verify
that the loaded our unloaded weight falls within the programmed limit; if the limit
is exceeded, the [
ERR-25
] message will appear on the display. To continue the
weighing operations, press the
OK
key or unload/load the excess/remaining weight.
7. To load or unload another Ingredient/Unload, repeat the Procedure from point 3.
8. To view the Total Weight press the
Net/Total
key and keep it pressed.
9. To view the current Ingredient/Unload name, press the Ingr. key and keep it
pressed.
10. To view the current Recipe Name, press the Recipe key and keep it pressed.
11. When all the Ingredients/Unloads have been executed, when the Queue Time has
expired, the equipment will automatically terminate the Recipe Execution Activity and
will go to the Manual Weighing Activity, displaying the Total Weight.
If the passage to the next Ingredient/Unload is programmed in Manual mode, when
the Queue Time expires, press the
q
key to terminate the Recipe Execution Activity
and to go to the Manual Weighing Activity.
12. To interrupt the Recipe Execution Activity, press the
Prog./Start
key for 2 seconds.
The [
QUIT
] message will appear on the display and the equipment will return to the
Recipe Programming Activity.
r
Important: if the equipment is supplied with a printer, the weighing operations are
accompanied by a printout.
r
chApter 1