KUHN GMD 600 G II, Руководство по сборке и эксплуатации

Страница: 41 / 48

- 39 -
8. Signalling elements
(photo 57)
(kit No. 102 6100)
Signalling elements can be ordered as an optional
extra. To install this kit proceed as follows :
- Attach tail lamp (N) to panel (A).
- Bolt panel (A) to support (S) with 3 hexagon screws
(E) (M 10 x 20), 3 plain washers (dia. 11 x 24 x 2) and
3 self-locking nuts (M 10).
- Attach guide (H) to the rear guard tube (T) with an U-
bolt and 2 self-locking nuts (L) (M 10).
- Plug electric cable (O) into the lamp terminal (N).
In transport position mount the panel (A) with its
support (S) in the guide (H) with lock (U) and plug
electric cable at the rear of the tractor.
Before putting the machine in
work position, dont forget to
unbolt the panel.
9. Quick hitch bracket (kit No. 103 6170
for the GMD 600
GII
- 700
GII
)
This kit is available as optional equipment for North
America.
Attach bracket (H) to 3-point frame (K) with 2 bolts (L)
and 2 self locking nuts (M 18) (photo 58).
GMD 800
GII
machines are equipped with a quick hitch
compatible 3-point frame (see page 19).
5 7
5 8
10. 1000 rpm drive kit (for GMD 800 GII and GMD 800 GII – HD) (Kit no. 1066010)
To install the 1000 rpm drive kit on machines already in service, refer to instructions no. L6800530 supplied with
the equipment.